King's Shoe



	Advanced Search

Basic Test Requirement

Scope
This part of ISO 8782 specifies, by reference to ISO 8782-1, basic and additional (optional) requirements for safety footwear for professional use.

Definition
For the purpose of this part of ISO 8782, safety footwear for professional use is defined as footwear incorporating protective features to protect the wearer from injuries which could arise through accidents in the working sectors for which the footwear was designed, fitted with toecaps designed to give protection against impact when tested at an energy level of 200J.

Applicable to CE EN345(Europe standard), AS/NZS 2210.3 (Australia Standard), SS105 (Singapore standard), MS EN345(Malaysia Standard)

Footwear Part	Type of Test
Design	Height of upper
	Seat region of different design
Whole footwear	Sole performance	Construction
		Upper/outsole bond strength
	Toe protection	General
		Toecap length
		Impact resistance
		Compression resistance
		Corrosion resistance of metal toecaps
	Leakproof footwear
Upper	Thickness
	Tear strength
	Tensile properties
	Flexing resistance
	Water vapour permeability and coefficient
	pH value
	Hydrolysis
Vamp lining	Tear strength
	Abrasion resistance
	Water vapour permeability and coefficient
	pH value
Quarter lining	Tear strength
	Abrasion resistance
	Water vapour permeability and coefficient
	pH value
Tongue	Tear strength
	pH value
Insole	Thickness
	pH value
	Water absorption and desorption
	Abrasion resistance
Outsole	Thickness
	Tear strength
	Abrasion resistance
	Flexing resistance
	Hydrolysis
	Interlayer bond strength
	Resistance to fuel oil

Additional Requirements
Footwear Part	Type of Test
Whole footwear	Penetration resistance
	Electrical resistance
	Resistance to inimical environments
	Energy absorption of seat region
Upper	Water penetration and water absorption
Outsole	Cleated outsole
Outsole	Resistance to hot contact